Refurbished painted kitchen in Shipston-on-Stour Warwickshire
Ron Taylor, Traditional Painter member for Warwickshire, explains the process on this Refurbished painted kitchen in Shipston-on-Stour Warwickshire.
Take it away, Ron
The client wanted a sprayed finish on their cabinets, so in my experience the best way to deliver that, is to hand paint the frames and spray paint the rest. You can almost see the thought bubble rising – won’t there be brush marks? As a hand painting specialist who can spray very well, there is no problem delivering a lovely smooth finish. It has taken me a lot of years to get this system down to a tee, but that’s what I believe I have done. Working with Traditional Painter Scot Hindley in Cheshire will do that to a kitchen painter!
Firstly the doors were removed and taken to our workshop. This approach makes the job much less disruptive for the client, and we can do the bulk of the work in a controlled environment.
The preparation process for the doors is exactly the same as the frames.
We thoroughly degrease every square inch or millimetre. Unfortunately no working kitchen is immune to grease particles, so we take no chances and treat all kitchens the same, applying less or more elbow grease, depending.
Here is a good summary from Lee Simone in Yorkshire about cleaning products for decorators. Other degreasers may be available, such is the speed of change in the market. Bear in mind that many eco cleaners are citrus based, and in their neat form are great for etching surfaces, ie liquid sanding. Therefore always read the instructions about dilution in order to avoid a more aggressive clean than you might want.
All surfaces are sanded to ensure a reliable key for the primer base coats. No stone is left unturned at this vital stage before any lids are popped off paint tins.
Protecting the kitchen from rogue paint
After cleaning down and sanding I applied Kip masking tape to the inside of the frames. I then brushed a coat of high adhesion primer, Zinsser Cover Stain, to the facing edges of the frames only. This was followed by 3 coats of water-borne Benjamin Moore Scuff-X Eggshell in Mascarpone. This system is very reliable and user friendly with a relatively small quantity of oil paint (the primer) required.
I brushed these edges to a finish so I could mask the entire units in one rather than individually.
Time for spraying
For demonstration purposes I can spray a clean line with a spray gun, but in the real world of kitchen painting, I mask everything carefully first.
With the kitchen masked we spray applied one coat of Insl-X Stix primer to all the non- painted kitchen frames ie open shelving, end panels, cooker head…
Stix is a high adhesion water based primer that sprays extremely well.
The sprayer used for painting the kitchen, as with all our paintwork, is a Tecnover TR4000P diaphragm airless. We’ve found the diaphragm pump offers more control when stopping and starting and gives a nice consistent flow. (Check out www.tecnover.com )
The finishing stage
After a light sand the following day, we started to spray apply the first of 3 coats of Benjamin Moore Scuff-X. It takes 2 days. The paint is soon touch dry and ready for reassembling the kitchen. We removed the masking tape and refitted the doors which we had already painted in the meantime back in the workshop.
We were asked to decorate the kitchen too: walls were painted with 2 coats of Benjamin Moore Regal Matte Fernwood Green.
It doesn’t seem to matter how many before and after photos of kitchens our clients have studied, it seems that most homeowners can never quite visualise just how big the transformation is going to be on their own kitchen. That is the only theory that seems to explain the general response at hand over time – I never thought it would look that good!
If you never heard of Benjamin Moore paints, this is a full run down on the performance we have been experiencing with Scuff-X. Several other Traditional Painter members also tend to specify BM paints these days on kitchens eg. Mark Roberts in Cheshire and Neil Callender in Hampshire,
The best way forward is to send me some photos of each section of your kitchen, including any details such as proposed modifications if any. I can usually work out an accurate free quote from good photos. However if I need to clarify anything I will get back to you promptly. If my proposal is in your budget, we can take it from there. Thanks for reading.
Please share it on Twitter, Facebook, or print it out for reference. Thanks.